JET CO TRAILERS
Jet Company is a leading manufacturer of high performance grain, flatbed, dropdeck, side dump, detachable gooseneck and tag trailers. Jet trailers have a proven record and high resale value. Years of experience and advanced engineering have developed testing procedures that ensure the greatest reliability and endurance. Testing is conducted using special test machines and usage under actual field conditions.
Jet Tag Trailers
Manufactured In Standard Capacities of 10-Ton, 12-Ton, 20-Ton, 25-Ton Standard and Specialty Trailers Available
TAG TRAILER OPTIONS
- Lockable toolbox
- Additional D-Rings
- Cleats on beavertail
- Third ramp
- Bulk head
- Ramp pockets
- Longer length
- Extra lighting
- Open beavertail
- Wood filled ramps
Top features of Jet Tag Trailers
- I-Beam crossmembers pass through our pierced main beams to allow for low deck height and added strength.
- Heavy duty spring assisted ramps fold flat for added deck space.
- Sealed wire harness has molded connectors to prevent moisture problems and down time.
- Heavy duty D-Rings are stronger anchor points for for securing loads.
- Beavertail and tongue are all part of a continuous main beam.
- Spring assisted ramps are an easy to flip, one-man operation and are self cleaning.
Jet Detatchable Gooseneck Trailers
Manufactured in Standard Capacities of 35-Ton up to 51-Ton Standard and Specialty Trailers Available
Detatchable Gooseneck Trailer OPTIONS
- D-Rings located on top of flange on lower deck
- Slide-outs (*available on 35 Ton series only*)
- 34′ Lower Deck (*available on 35 Ton series only*)
- Lift axle control box
- Steel front deck – covered w/apitong
- Aluminum deck
- Lid on tool box on main deck
- Outriggers on 2′ centers
- Crossfire dual tire equalization
- Tire inflation system
Top features of Detatchable Gooseneck Trailers
- Front loading ramps with tapered front & traction bars
- D-Rings are approximately 6′ centers on lower deck on web of outer rail
- Chain ties are approximately 6′ centers on outer rail on lower deck
- Decking: 2″ nominal apitong in the track area
- Tool box located in front of lower deck between main beams (no lid) – approximately 30″W x 41″L x 11″D
- 25,000 lb. axles with ABS
- 9″ air ride suspension
- Liquid-filled air gauge in enclosure
- 4 flag holders on front lower deck & rear of trailer
- Manual raise & lower valve
- 10-hole steel disc wheels (nut 33mm), Tires: 255/70R 22.5 radials
Jet Side Dump Trailers
Jet Company side dumps have a trunnion mounted inverted cylinder lift design for reduced tub acceleration and improved trailer stability. Thier side dumps offer the versatility of a trailer for any need and are perfect for construction, agricultural or commercial use.
Side Dump Trailer OPTIONS
- 36′ Tub- 22 Cubic Yards Waterfull 33 Cubic Yards
- Electric Tarp System
- (8) 8.25 x 24.5 Steel
- (8) 11R24.5 Steel
- Aluminum Wheels
- Triple Axle
- Lift Axle
- Trailer Mounted Directional Control Valve
- Tub Liner – Friction Reduced Coating
- Color Variations available upon request
Top features of Side Dump Trailers
- PATENTED Trunnion Mounted Hydraulic Cylinder Design
- Four Tub Pivots per Side
- Maintenance Free Greaseless Bushings
- No Center Divider
- Rounded Tub
- Blasted Paint Preparation
- Angled Internal Tub Corners
- Flex Corner Design
- Air Ride Standard
- Quick Air Exhaust
Jet Dropdeck Trailers
Jet Company specializes in standard as well as custom designed trailers. Offering Dropdecks and Double Dropdecks in a wide choice of sizes, configurations and colors. Thier high performance trailers are designed for Big Payloads.
Dropdeck Trailer OPTIONS
- Tire Carrier
- Beavertail
- Lift Axles
- Winch Straps
- Sliding Tandems
- Manual Dump Valve
- Air Ride Suspension
- Spring Suspension
- Closed Tandem
- Coil Package
Top features of Dropdeck Trailers
- Up to 53′ (longer lengths upon request)
- 96″ or 102″ standard
- Main Beam – High strength material. Ranges from 24″-28″ deep in center.
- Rubrail – 3/8″ x 2-1/2″ high strength aluminum extrusion or 3/8″ x 2″ steel
- Stake Pockets – Spaced 24″ apart with pipe-spool. ID 1-5/8″ x 3-7/16″
- 30″ Kingpin standard. Other settings available.
- Axles – 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspension
- Air ride suspension available in closed tandem or 10’1″ spread. Spring suspension available in closed tandems.
- Two speed landing legs. Ultimate load capacity 140,000 lbs.
- 1-1/4″ extruded aluminum floor, 1-1/8″ apitong floor or 2″ nominal oak floor. 5/16″ zinc plated floor screws
- Kneebraces approximately every 4′ supporting outside rail
Jet Flatbed Trailers
Jet Company specializes in standard as well as custom designed trailers, offering Flatbeds in a wide choice of sizes, configurations and colors. Thier high performance trailers are designed for Big Payloads.
Flatbed Trailer OPTIONS
- Tire Carrier
- Lift Axles
- Winch Straps
- Sliding Tandems
- Manual Dump Valve
- Air Ride Suspension
- Spring Suspension
- Closed Tandem
- Coil Package
- Lower Deck Heights
Top features of Flatbed Trailers
- Up to 53′ (longer lengths upon request)
- 96″ or 102″ standard
- Main Beam – High strength material. Ranges from 24″-28″ deep in center.
- 4″ high strength aluminum extrusion or 4″ high strength steel. Crossmembers are available on 12″, 14″, 16″ or 18″ centers.
- 6″ side high strength aluminum extrusion, 6″ steel channel, 8.2 lbs./ft. The siderail is the winch track on both sides.
- Rubrail – 3/8″ x 2-1/2″ high strength aluminum extrusion or 3/8″ x 2″ steel
- Stake Pockets – Spaced 24″ apart with pipe-spool. ID 1-5/8″ x 3-7/16″
- 30″ Kingpin standard. Other settings available.
- Axles – 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspension
- Air ride suspension available in closed tandem or 10’1″ spread. Spring suspension available in closed tandems.
Jet Steel Grain Trailers
Manufactured In Standard Lengths of 22′, 26′, 30′, 34′, 36′, 38′, 40′ and 42′. Standard and Specialty Trailers Available
Steel Grain Trailer OPTIONS
- Sight windows
- Tarp vents
- Catwalks
- Air ride suspension
- Side chutes
- Electric tarp kit
- Extra lights
- Paint colors
- Aluminum wheels
- Super single wheels and tires
Top features of Steel Grain Trailers
- PATENTED Rounded Hoppers & Rounded Slopes
- PATENTED Easy Open Grain Doors w/Self-Cleaning Poly Rollers
- PATENTED Hanging Slopes
- PATENTED Offset Hoppers (26′ & 30′ Models)
- 20,000 lb. Rated Axles, Outboard Mounted Brake Drums, Hub Piloted
- ABS Brakes (2S1M) w/Automatic Slack Adjusters
- Hub Piloted Steel Wheels
- High Performance Primer & Paint System and Undercoating
- LED Lights
- Sealed Wire Harness with Internal Ground
- Large Ladders on Sloped Ends, Front & Rear
- 50,000 lb. Two-Speed Landing Gear
Jet Aluminum Grain Trailers
Manufactured In Standard Lengths of 34′, 38′, 40′ and 42′. Standard and Specialty Trailers Available
Aluminum Grain Trailer OPTIONS
- Sight windows
- Tarp vents
- Catwalks
- Air ride suspension
- Side chutes
- Electric tarp kit
- Extra lights
- Paint colors
- Aluminum wheels
- Super single wheels and tires
Top features of Aluminum Grain Trailers
- PATENTED Rounded Hoppers & Rounded Slopes
- PATENTED Easy Open Grain Doors w/Self-Cleaning Poly Rollers
- PATENTED Hanging Slopes
- 20,000 lb. Rated Axles, Outboard Mounted Brake Drums, Hub Piloted
- ABS Brakes (2S1M) w/Automatic Slack Adjusters
- Hub Piloted Steel Wheels
- High Performance Paint System and Undercoating
- LED Lights
- Sealed Wire Harness with Internal Ground
- Large Ladders on Sloped Ends, Front & Rear
- 50,000 lb. Two-Speed Landing Gear
